Hollow plastic building formwork is a kind of energy-saving and green environmental protection product, pp plastic combined with macromolecule nano-technology.
it can replace the wood plywood totally, good performance than WPC formwrok and PVC formwork.
The popular size is 1220*2440mm, 1200*2400mm, customized is welcome.
Hollow plastic building formwork is a kind of energy-saving and green environmental protection product, pp plastic combined with macromolecule nano-technology. It is a new product after wood formwork, composite steel formwork, bamboo-wood bonding formwork and all-steel large formwork. It is energy saving and environmental protection,and can completely replace the traditional steel formwork, wood formwork, square wood, What’s more, its amortization cost is very low.
The hollow plastic building formwork is environment-friendly and energy-saving, economical and practical for its recycling, and becomes a new favorite in the construction industry because its waterproof and corrosion resistance. The product will gradually replace the wood template in the building, thus saving a lot of wood resources for human, and has a great effect on protecting the environment, optimizing the environment and reducing the carbon emission. The hollow plastic building template can be fully recovered and reused by 100%, and the zero-waste discharge is really realized, and it will be the revolutionary building material in the 21st century. The application of several patented technologies has more fully improved its utility:
Plastic formwork VS Traditional formwork
|Item||Hollow Plastic Formwork||PVC Formwork||Wooden Formwork||Aluminium Formwork|
|Drop test(10m)||No break||No break||break||Severe deformation|
|Deformation condition||No deformation||No deformation||Deformation||No deformation|
|Book nail||Easy||Difficult||Easy||No nails|
|Dilatability and shrinkage||Very little||Variation with temperature||Little||Little|
|Energy-saving||Recycled||Recycled||Large lumber consumption||Recycled|
12-20mm thickness all we can provide
Product specifications and thickness can be customized to customer requirement
1.Use the hollow building formwork intersecting laid with 15mm thick.
2.(1)Wood square of the distance on the surface of the intersection spacing wood square distance according to the thickness of the slab concrete in general the thickness of less than 0.15m floor spacing is 200~250m. (2)The shear wall or sample using the formwork (15mm thickness spacing is 100~150mm if the shear wall pillar width more than 1 meter must add the fixed frame.
3.Die shear wall and column puzzle when leaving no gaps internal angle the bottom of the wall parts must have wood square beam wall formwork connection shear wall made 4 after the mold must be assembled into the whole hoisting then lay flat reduce labor intensity forming effect is good.
4.When the nail to the formwork from the formwork edge distance 15~30mm strength wants moderate nail nails is 40~50mmm in length should not be too long or too short.
5.Beam bottom of a piece of wood square must set aside 15 mm seam allowance wallboard made on wood square seam allowance it does not leak slurry and wallboard material saving .