The Plastic Construction Formwork is a composite material extruded at a high temperature of 200 ° C. It is an energy-saving and environmentally friendly green building material product. It is produced from recyclable plastics and can be reused more than 50 times, and after use, the factory will fully recycle it, including all scraps. For the engineering party using, it can not only share the cost, but also effectively protect the environment, and save the construction waste cleaning costs. Wooden formwork: taken from the forest. During the booming period of the construction industry, a large number of wooden formwork was used, and the damage to forest resources was amazing. After 5-10 uses, it can only be scrapped.
Plastic Formwork For Construction has a complete installation method, and construction workers will be trained in standardized system installation so that they can strictly follow the construction of the system and perform their duties step by step without wasting labor and material costs. In addition, the formwork is very lightweight, and the use of plastic building templates has basically no safety hazards. Wooden formwork: rough workmanship, chaotic assembly process, no systematic installation method, construction workers assembled according to their feelings, relocation in some places, wasting manpower and material resources; during the installation process, due to the material characteristics of the wood itself, if you do not pay attention, Construction workers may will be injured.
Plastic Formwork is a composite material extruded at a high temperature of 200 ° C. It has high impact resistance and corrosion resistance, is not easily deformed, and will not deform after rainwater immersion without affecting construction progress. Wooden formwork: not resistant to wear and corrosion. Rainwater erosion and high temperature and low temperature will affect its use, especially after rainwater immersion will cause cracking and other damage, which will not only increase the use cost but also affect the construction schedule.
The turnover of plastic building templates is more than 50 times, and the construction efficiency of the same workload is several times that of wooden templates. Wooden template: The turnover rate of wooden template is about 5 to 10 times. And must ensure that it is used in normal weather, if it is exposed to sunlight or rain for a long time, it will reduce its turnover.
Of course, many people will ask, since plastic building templates have many advantages over wooden templates, why are more wooden template applications than plastic building templates in China? Let us look at two very important issues. Plastic building templates are a new type of building materials, which are insufficiently promoted. There are few people who understand plastic building templates, and most of them dare not try to use them, so there are not many people who naturally use them. On the other hand, at first glance, it seems that plastic construction templates are much more expensive than wooden templates. The current market price of wooden templates is between 40 and 50 yuan, while the price of plastic construction templates is about 150-160 yuan, which is three times about wooden templates. But in fact, because the turnover rate of plastic building templates is about 5-8 times that of wooden templates, the actual cost of using plastic building templates can save about 30 ~ 40% than the actual cost of wooden templates, and many construction units only care about once Sexual investment is large without paying attention to the total cost savings, so not many people use it. However, as a new green and environmentally friendly building material supported by the state, plastic building templates will eventually replace wooden templates in the future.